The Official Android 4.3 Jelly Bean OTA Update for Galaxy Note 2 LTE is here. Use this tutorial and learn how to successfully flash the latest JB firmware for your phablet without bricking the device. Note that this is still a guide for advanced users, so you shouldn’t try to update the phone in case you don’t know what you’re doing.
In case you didn’t get the official OTA Update to Android 4.3 notification on your Note 2 N7105 then you can use this post and learn how to manually install it. Also, you can try to use the Samsung KIES and check for the update yourself, but that will work only for devices that are already on stock ROMs.
This guide can be used to flash the latest stock Android 4.3 JB update if your device is running on custom ROM and you cannot search for updates using KIES or the Software Update button under Settings menu. Before starting the update, you will first need to take a look at the preparation guide below:
- Use this post only for the Samsung Galaxy Note 2 LTE model number N7105.
– don’t attempt to update any other smartphone with the instructions you find below.
– if you own a Galaxy Note 2 N7100, then you should use this guide here to update it to Android 4.3 JB XXUEMK5.
- If you’re on stock ROM, then it would be best for you to search for new updates via Settings> More> About Phone and then Software Updates menu.
– also, try to use the Samsung KIES software to find new update files.
- In case your device is rooted, but it doesn’t feature any new custom ROMs, then the Android 4.3 XXUEMK5 firmware will revoke root but it won’t delete any files from your device.
- In case the Note 2 is rooted and it features a custom ROM, then you will be able to update it, but the system partition will be wiped in the process.
– internal / external sdcards won’t be affected by this process.
- Download and Install the Samsung USB Drivers on your PC here.
- Enable USB Debugging from Developer Options menu.
– If Developer Options isn’t listed, then you need to open the ‘About Phone’ section, then scroll down to Build Number and tap seven times on it to become a developer. After that you can go to Developer Options under Settings and enable USB Debugging.
- Read the entire post, don’t skip any steps and don’t blame us in case you brick the phone or lose any important data in the process.
- Check the Note 2 LTE battery charge level and make sure that it is over 50%, so that the device won’t switch off in the middle of the updating process.
- For any other questions regarding the preparation guide, use the comments field at the end of this post.
- Download N7105XXUEMK5 firmware zip file from here.
– this is a build released for the Nordic Countries (Scandinavia), but it will work with all International Note 2 LTE devices.
- Extract the N7105XXUEMK5 zip contents.
– place all files in a single folder on your desktop.
- Download Odin3 v3.09 from here.
– extract its contents in a single folder.
- Energy off your instrument now utterly via disposing of its battery.
– re-insert the battery again into its situation after 5 seconds move via.
- Launch Odin three.09 executable to your pc.
- Boot your software in Android Obtain Mode.
– it may be carried out in the event you press and hang Extent Down, Dwelling and Energy all on the related time.
– unlock the buttons when the Warning! message seems, after that press Quantity As much as verify the Obtain Mode boot course of.
- Use the USB cable and fix your Word 2 LTE to your PC.
– look forward to the tool to be detected by way of ODIN and proceed to your next step.
– if your software will not be known, you then will have to re-set up the Samsung USB Drivers.
- Subsequent, click on the PDA button in ODIN.
- Now, load the N7105XXUEMK5_N7105NEEEMK1_N7105XXUEMJ9_HOME.tar.md5 file in Odin.
– don’t edit another default Odin settings.
– make it possible for the Re-Partition possibility shouldn’t be enabled.
- Click on the START button and stay up for the brand new firmware to complete set up.
- When the brand new inventory Android four.three set up is full ODIN will convey the ‘PASS’ alert and the tool will restart in customary mode.
- Disconnect the telephone from PC when it boots in Android four.three Jelly Bean, then begin trying out all of its new options and purposes.
That was once the remaining step you needed to take in an effort to full the handbook OTA Replace to the most recent Jelly Bean firmware. When you have issues with the set up, you then must check out the ‘notes’ beneath.
NOTE: if ODIN freezes, it shows the ‘FAIL’ alert or for some other purpose the set up fails, then you definitely must do the next: shut Odin, disconnect the telephone from laptop, then get rid of the telephone’s battery — re-insert the battery and after that you simply will have to repeat your entire tutorial as soon as once more.
NOTE 2: if ODIN says that the set up is full, however the instrument doesn’t go previous the Samsung boot animation you are going to be compelled to use a ‘manufacturing facility reset’. This course of will dispose of all information from gadget partitions whereas the inner / exterior storage gained’t be affected. Right here’s the best way to manufacturing facility reset your Galaxy Observe 2 on Android four.three JB:
- Energy off the cellphone through putting off its battery.
– re-insert the battery again into its position after just a few seconds go by means of.
– ensure that your cellphone is just not related together with your laptop.
- Now, press and dangle Extent Up, Residence and Energy buttons.
– free up the buttons when the inventory Restoration menu seems.
- Make a selection ‘wipe information/ manufacturing facility reset’ possibility from the inventory Restoration Mode reveal.
- Ascertain the method.
- When accomplished with manufacturing unit reset, make a choice ‘reboot machine now’.
- Wait a few minutes for the primary boot course of to load all of the required recordsdata.
- Enter your Google Account small print when the house monitor of Android four.three seems.
I am hoping that you just’ve managed to efficiently replace your software. If you happen to can’t full the academic, then you definitely will have to ask for extra lend a hand in remark. You’ll want to depart an in depth remark, in order that we will provide you with a achievable answer for any form of issues.