Necessities: Android model 2.1 and better
Overview: Cellular ODIN – Full firmware flashing straight from the instrument itself!
Cell ODIN is the on-instrument firmware flasher of possibility. Simply throw these firmware recordsdata for your (inside or exterior) SD card, begin Cellular ODIN and flash away.
!!! Your software should be rooted so to use Cellular ODIN. Test the record beneath to peer in case your software is supported !!!
For those who use the EverRoot possibility, Cell ODIN will root the firmware when you flash it. Testing that new leaked firmware? No motive to lose root!
At present supported gadgets:
Samsung Galaxy S:
– AT&T/Rogers Captivate SGH-I896/I897
Samsung Galaxy S2:
– AT&T SGH-I777
– Dash/Virgin/Enhance Epic 4G Contact SPH-D710/VMUB/BST
– USCC SCH-R760
Samsung Galaxy S3:
– LTE SHV-E210S
– LTE GT-I9305/T/N
– AT&T/Canadia SGH-I747/M
– TMOUS SGH-T999
– Dash/C-Spire SPH/SCH-L710
– VZW SCH-I535 (free up bootloader !)
– USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
Samsung Galaxy S4:
– LTE GT-I9505
– Dash SPH-L720
– TMOUS SGH-M919
– USCC SCH-R970
– Canadia SGH-I337M
Google Galaxy Nexus:
– GSM Maguro/Yakju/GT-I9250
– CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Samsung Galaxy Observe
Samsung Galaxy Observe 2:
– LTE GT-N7105
– AT&T/Canadia SGH-I317/M
– TMOUS SGH-T889
– Dash SPH-L900
– VZW SCH-I605 (liberate bootloader !)
– USCC SCH-R950
Samsung Galaxy Be aware three:
Samsung Galaxy Be aware eight.zero”:
– 3G GT-N5100
– Wi-Fi GT-N5110/N5113
– LTE GT-N5120
Samsung Galaxy Notice 10.1″:
– 3G GT-N8000
– Wi-Fi GT-N8010/N8013
– LTE GT-N8020
Samsung Galaxy Tab:
– Tab 7″ GT-P1000
– Tab 7.zero Plus GT-P6200/L, GT-P6210
– Tab 7.7″ GT-P6800, GT-P6810
– Tab 10.1″ GT-P7500, GT-P7510
– Tab 2 7″ GT-P3100, GT-P3110, GT-P3113
– Tab 2 10″ GT-P5100, GT-P5110, GT-P5113
Samsung Galaxy 5:
Extra units to come back!
Flashing with Cell ODIN does NOT elevate your customized kernel flash counter or make the yellow warning triangle seem.
For dialogue, investigate cross-check the discussion board thread on XDA-Builders.com: http://forum.xda-developers.com/show….php?t=1347899
—– MANUAL —–
Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file – Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to “PDA”, “PHONE”, and “CSC” buttons. All three of these buttons have been replaced by the “Open file …” button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to “Flash firmware”. Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
—– DEVICE SUPPORT —–
See the forum thread on XDA-Developers.com ( http://forum.xda-developers.com/show….php?t=1347899 ) for more information on how to get your device supported.
– Updated: SuperSU v1.65
– Updated: Root installation for 4.3+
– Added: Support for:
— Samsung Galaxy Note 3 International SM-N9005
– Fixed: Files from internal SD would not flash on Android 4.2+ devices
– Updated: SuperSU v1.34
– Added: Support for:
— Note 10.1″ LTE GT-N8020
— Note 8.0″ 3G, Wi-Fi, LTE GT-N5100/10/13/20
— S4 Qualcomm LTE
This app has NO advertisements