Samsung Galaxy Note 8.0 N5110 can now be rooted using Chainfire’s CF Auto-Root tool. Read this entire post and make sure that you won’t skip any steps so that you will manage to successfully flash the all the required files.
In order to successfully root your device, you will first need to read the guidelines below. Here’s what you need know:
- use this tutorial only with the Samsung Galaxy Note 8.0 model number N5110. Don’t try to use this tutorial with any other Android device.
- root your device only if it’s running on Android 4.1.2 Jelly Bean stock firmware.
- rooting the tablet will void the warranty.
- CF Auto Root file will install SuperSU and install a stock Recovery.
- make sure that you have the Samsung USB Drivers installed on your PC. If you don’t have them, then you can download from here.
- disable all the antivirus apps from running on your computer.
- if Samsung KIES software is installed on your PC, then you should make sure to disable it when moving to the tutorial. This program will interfere with Odin and block the rooting process of your tablet.
- make sure that you won’t skip any steps that I have listed in the tutorial.
- enable the USB Debugging setting from the Developer Options menu. If this menu isn’t showing up in Settings, then you should open ‘About device’ and then scroll down and tap 7 times on the Build Number section. It will enable Developer Option in the Settings menu.
- make sure that your tablet’s battery has enough power left in its battery so that it won’t switch off in the middle of the rooting process.
- this guide is for advanced Android users, don’t blame us in case you brick the tablet or you lose any important data in the process.
- in case you cannot complete the root, then you should ask for extra help in comments.
- backup all the important data that you have currently stored on your tablet.
Now that you know all of the above, continue to the next part of this post and learn how to properly root your tablet.
- Download the CF Auto-Root tool for Galaxy Note 8.0 N5110 from HERE.
> save the file on your PC and extract its contents to a single folder.
- Download Odin3 v3.07 from HERE.
> when the obtain is full, extract the information comprised inside and shop them in a single folder.
- Energy off your pill totally.
- Boot it into Obtain Mode.
> do it with the aid of urgent Quantity Down, Residence after which Energy buttons on the on the similar time. Verify Obtain Mode boot through urgent Extent Up.
- Launch Odin executable for your PC.
- Join the pill together with your laptop the usage of the USB Knowledge cable.
> look ahead to Odin so as to add and acknowledge the tool. When accomplished, you could proceed to the subsequent a part of this put up.
> if the pill will not be identified by using your pc, then you’ll be compelled to plug the instrument into some other USB port or reinstall the Samsung USB Drivers. The obtain hyperlink is listed within the practise information.
- Subsequent, click on the ‘PDA’ button in ODIN.
- Browse your PC for the ‘CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5′ file and cargo it into Odin.
> don’t exchange any default settings of ODIN.
> be sure that the Re-Partition possibility just isn’t enabled. Disable it if in any other case.
- Click on the START button while you’re prepared for the set up course of.
- When all information are flashed and the basis is full, ODIN will say ‘PASS’ and the software will reboot.
- When the Samsung boot animation seems, unplug the cellphone from PC and stay up for it in addition into customary mode.
- Test the App Drawer for the SuperSU app icon to verify that the basis has been utilized efficiently.
- Set up any new apps that require root or begin on the lookout for customized ROMs and different customization information that you should utilize to reinforce the general efficiency of your pill.
If ODIN freezes then the basis was once now not achieved and you’re going to be compelled to disconnect the pill from PC. Shut ODIN after which repeat the whole tutorial as soon as once more to ensure that you gained’t skip any steps that I’ve listed above. If you want extra lend a hand, use the feedback part.
If ODIN says that the basis course of used to be ‘Handed’ however the Galaxy Notice eight.zero N5110 doesn’t go previous the Samsung boot animation monitor, then you’ll have to energy off the tool and unplug it from PC. You’ll have to boot into Restoration Mode and follow manufacturing facility reset. After that, the pill will boot into standard mode accurately. You probably have every other questions, then you definately must ask for additonal lend a hand in feedback.
On the grounds that this root received’t set up any customized Restoration photography, then that you may select to discuss with Google Play Retailer and use the Goo Supervisor or ROM Supervisor app to flash TWRP / CWM Restoration. A customized Restoration will will let you set up new customized ROMs and different customization recordsdata on your pill.